Monday, April 23, 2012

Removing graphics from vehicle ???

I just bought a white Jeep that had a splash of color graphic design on the sides. I took a hair dryer and peeled them off but impressions remain. Is there anyway of removing the impressions without having to repaint the vehicle?



Removing graphics from vehicle ???

you can have it buffed out,that will blend all the paint color in together on it,especially and it being white,that's an easy color to work with,but some good rubbing compound and a real good buffer and all of it will blend back in on it,good luck with it.



Removing graphics from vehicle ???

your welcome. Report It



Removing graphics from vehicle ???

are these so called impressions just oulines from the vynels?...If so get some white spirits and a rag and it should remove the outlines,if that dont work try some cut and polish with a buffer



Removing graphics from vehicle ???

I did the same with hair dryer with my truck. To remove the impressions I purchased a sovent cleaner, I think it was called 3M Adhesive Remover. Even something like goof off might work, but ofcourse test it somewhere first. The solvent will soften the adhesive, then gently scrape it off with a plastic spreader that would be used for applying bondo. I tried rubbing it off with a rag first and it just smeared the adhesive around.

No comments:

Post a Comment